- 1. Dip stick, TF (score: 1)
- Author: TATERRY@aol.com
- Date: Mon, 27 Dec 2004 14:01:15 EST
- Thanks to all who responded to my dip stick problem on the TF. Most thought it was because the tube was bent during a rebuild. I have pushed the tube to and fro but without making much difference. Wh
- /html/mg-t/2004-12/msg00078.html (6,952 bytes)
- 2. RE: Dip stick, TF (score: 1)
- Author: "Bob Grunau" <grunau.garage@sympatico.ca>
- Date: Mon, 27 Dec 2004 14:49:56 -0500
- No trick, push a wood or metal dowel/rod into the tube, grip tube with vice grips or pliers and it should come out easily. The dowel stops the tube from being crushed. It is a straight press fit. Bo
- /html/mg-t/2004-12/msg00080.html (7,555 bytes)
- 3. RE: Dip stick, TF (score: 1)
- Author: "Gene Gillam" <anngene@bellsouth.net>
- Date: Mon, 27 Dec 2004 15:06:35 -0600
- Reference pulling out the dipstick tube from the block - it's just a press fit into the block and new tubes are available from Abingdon Spares if yours is bent and can't be straightened. Gene Gillam
- /html/mg-t/2004-12/msg00081.html (6,913 bytes)
This search system is powered by
Namazu