- 1. Gas tank felt and insulation (score: 1)
- Author: CEBushnell@aol.com
- Date: Wed, 8 Jun 2005 00:13:38 EDT
- Just got my gas tank back from MOYER Renu and am wondering about the purpose/necessity of applying the felt strips as Moss has pictured in it's catalogue. When i removed the tank it wasn't wearing an
- /html/triumphs/2005-06/msg00166.html (7,031 bytes)
- 2. 4A tank straps and tank Renu pics (score: 1)
- Author: CEBushnell@aol.com
- Date: Fri, 10 Jun 2005 09:04:59 EDT
- Thanks all, for the suggestions re. the felt and insulation question...and then... When i pulled the gas tank there were no mounting straps. It was attached with only the six screws into the frame. (
- /html/triumphs/2005-06/msg00223.html (7,073 bytes)
- 3. Renu Process - addendum (score: 1)
- Author: CEBushnell@aol.com
- Date: Wed, 22 Jun 2005 04:24:58 EDT
- For those who asked about my experience with the Renu process there's something i should add. I managed to install the tank yesterday after quite a battle. Either the tank or the car had changed dime
- /html/triumphs/2005-06/msg00657.html (7,220 bytes)
- 4. TR4A Wiper Motor (score: 1)
- Author: CEBushnell@aol.com
- Date: Wed, 29 Jun 2005 12:22:08 EDT
- Hi All, I had been told by a restorer/National Judge of Triumphs that the two-speed wiper motor which was originally in my car was "not correct" and that it should be a single-speed. The Moss UK cata
- /html/triumphs/2005-06/msg00806.html (7,255 bytes)
- 5. Pic Request, water pipe attachment 4A (score: 1)
- Author: CEBushnell@aol.com
- Date: Sat, 9 Apr 2005 11:28:46 EDT
- I will be replacing the sliced and diced water pipe currently on my 4A with a single length of pipe but can't find anything resembling a mounting bracket at the rear of the engine. How should it be a
- /html/triumphs/2005-04/msg00230.html (6,427 bytes)
- 6. Source for Fuel Pump Compression Fitting (score: 1)
- Author: CEBushnell@aol.com
- Date: Thu, 31 Mar 2005 18:24:56 EST
- Found a source for my AC fuel pumps "Out to carbs port" (an "Inverted Flare Fitting - Piloted Nut for Single Flared Tubing" *G*) 1/2"x20tpi for a 1/4" pipe compression fitting -- http://www.stevsonmo
- /html/triumphs/2005-03/msg00936.html (6,811 bytes)
- 7. Fuel Pump Compression Fitting (score: 1)
- Author: CEBushnell@aol.com
- Date: Sun, 6 Feb 2005 05:45:10 EST
- Had to laugh after reading my post from yesterday, didn't even know i had a " " key! --(let me try this from my AOL account)-- It was meant to have been read as an ""Inverted Flare Fitting - Piloted
- /html/triumphs/2005-02/msg00154.html (7,193 bytes)
This search system is powered by
Namazu