Source for Fuel Pump Compression Fitting

[CEBushnell@aol.com]

Found a source for my AC fuel pumps "Out to carbs port" (an "Inverted Flare 
Fitting - Piloted Nut for Single Flared Tubing" *G*) 1/2"x20tpi for a 1/4" pipe 
 compression fitting -- http://www.stevsonmotors.co.uk/home.htm -- Following 
the advice offered on The List along with Scott Shuring's diagram -- 
www.cptc.org/tech_tips/Fuel_line_compression_fittings.htm --, was able to quash 
the 
hemorrhage of gas from the pump and finish replacing the under-hood fuel lines 
on 
my car. Thanks all,

Chuck
4A