> Interesting stuff though, if you understand it. I have tried
> , I have all
> the books. They could be in Chinese for what good they have been.
But you needn't really understand it for this; just be able to solder two wires
together and follow directions. There is some skill
involved in making a good solder joint, but it's not difficult to learn.
I was already doing a creditable job of soldering when I was 13, even though I
understood almost nothing of resistors and diodes. I
was into HO scale model trains back then, and built a complicated layout with
multiple zones that could be connected to either of
two controllers through a slide switch for each zone; just following plans from
a book. And it worked, too, until we had to move
away and most of my hard work went in the trash.
-- Randall
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|