I've heard of the timing mark on the pulley slipping due to debonding
of the rubber to the steel. You might want to check that TDC really
is TDC.
--
Jeff Scarbrough
Corrosion Acres, Ga.
On Sat, Jan 24, 2015 at 8:13 PM, William Brewer <wsb1960tr3a@att.net> wrote:
> I am trying to get my TR6 back on the road. I can't seem to get the
> timing set right. I had the distributor rebuilt at advanced distributor. It
> runs much better, but the idle is really high with the idle adjustments
> backed all the way off. The engine starts and stops easily and doesn't
> smoke. We adjusted the chokes so they are off when they are supposed to be.
> The one thing that is confusing is that we removed the large vacuum hoses
> that connect the ZS carbs to the valve cover and the idle dropped 400 rpms
> with those ports open. My friend and I both agreed that if the carbs were
> running rich then the engine would have been smoking when we revved it.
> Any ideas or suggestions for the list?
> Does anyone have a link to a basic "How to troubleshoot
> Zenith-Stromberg carburetors?
>
> TIA,
>
> -Bill Brewer
> Tehachapi, CA
>
>
> ** triumphs@autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/fishplate@gmail.com
>
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|