Thanks for the posts to date. I just use the jtype od to describe my whole
tranny. The OD works fine. I had heard that the forks could have been bent
and that could cause a similar problem and that I could try a different top
cover, which I have to see if that works. Just hadn't gotten around to it.
jim
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Jeff
Sent: Monday, December 02, 2013 9:00 PM
To: triumphs@autox.team.net
Subject: Re: [TR] Gearbox Woes
On 12/2/2013 7:08 PM, James Henningsen wrote:
> My J-type in the TR6 is grinding above 4000 rpm in second and third.
> I had the German syncros put in to fix the problem, but it didn't.
I'm a little confused... "J-type" implies overdrive, but you mention
syncros, which aren't attached to the overdrive.
I assume it only grinds when using the shift lever?
And were the springs and balls checked for proper tension when the syncros
were replaced?
Jeff Scarbrough
Corrosion Acres, Ga.
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
** triumphs@autox.team.net **
Archive: http://www.team.net/archive
|