Re: [TR] Shaking TR3

[Don <dkspence@telus.net>]

Which means you have the longer steel wheel studs in place already.

The only way you would get that is if you/someone had previously  
converted to wires and spacers from steel wheels.


On 17-Jun-11, at 7:46 PM, triumphs-request@autox.team.net wrote:

> In a message dated 6/17/2011 1:14:57 PM Central Daylight Time,
> dkspence@telus.net writes:
>> That only works going the other way.  Steel to wires.  Your product
>> would only exacerbate an already dangerous situation as in preventing
>> the lug nuts from a full "grasp" of the studs
>>
>
> I think that's what he meant.  If you have wires and spacers you can  
> remove
> the spline hubs and spacers and bolt up a steel wheel.  Easy-peasy.
>
> Dave
triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums