Re: [TR] Shaking TR3

[Dave1massey@cs.com]

In a message dated 6/17/2011 1:14:57 PM Central Daylight Time, 
dkspence@telus.net writes: 
> That only works going the other way.  Steel to wires.  Your product  
> would only exacerbate an already dangerous situation as in preventing  
> the lug nuts from a full "grasp" of the studs
> 

I think that's what he meant.  If you have wires and spacers you can remove 
the spline hubs and spacers and bolt up a steel wheel.  Easy-peasy.

Dave
triumphs@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums