> It
> seems if the #4 wire is close to the heater pipe - it arcs through the
> insulation of the wire just below where to boot ends.
IMO that indicates the voltage is going too high before it jumps the plug
gap. There is a limit to how much that insulation will stop (which is true
of the entire system). So there may be a problem with the spark plug (or
gap).
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|