take it and have it media blasted.
should cost you about 30.00
frank
________________________________
From: Carl TR <cfmtr3a@verizon.net>
To: Gary
Nafziger <nafzigerg@yahoo.com>; triumphs@autox.team.net
Sent: Sun, September
12, 2010 8:11:15 PM
Subject: Re: [TR] tr-3 dash cover..
I'd be careful with
that approach. any imperfections left on/in the metal may
be obvious when
the vinyl is glued/stretched.
industrial strength vinyl remover should get it
off. Just let it soak a bit.
Carl
----- Original Message ----- From: "Gary
Nafziger" <nafzigerg@yahoo.com>
To: <triumphs@autox.team.net>
Sent: Sunday,
September 12, 2010 10:51 PM
Subject: [TR] tr-3 dash cover..
> covering my 3
dash is still too far off and i've not even looked at it. Too
far
>
out........ so i'm in no place to give advice........lol............but i'm
>
wondering how using an angle grinder with a knotty wire brush would work
taking
> off old adhesive/vynl? Pretty aggressive I know but i've seen what
this can
do
> to old paint/rust............just wondering.
>
>
> gary n.
>
> _______________________________________________
> Triumphs@autox.team.net
>
Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/triumphs/yellowtr3@yahoo.com
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|