I'd be careful with that approach. any imperfections left on/in the metal
may be obvious when the vinyl is glued/stretched.
industrial strength vinyl remover should get it off. Just let it soak a
bit.
Carl
----- Original Message -----
From: "Gary Nafziger" <nafzigerg@yahoo.com>
To: <triumphs@autox.team.net>
Sent: Sunday, September 12, 2010 10:51 PM
Subject: [TR] tr-3 dash cover..
> covering my 3 dash is still too far off and i've not even looked at it.
> Too far
> out........ so i'm in no place to give advice........lol............but
> i'm
> wondering how using an angle grinder with a knotty wire brush would work
> taking
> off old adhesive/vynl? Pretty aggressive I know but i've seen what this
> can do
> to old paint/rust............just wondering.
>
>
> gary n.
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|