I am stripping my TR6 down for painting. I want to change remove the
rubber seal between the windshield frame and the scuttle. I loosened the two
nuts that appear to hold the windshield frame on. They are in the outer wall
of the footwell below the windshield frame corners and leading forward at
about a 30 degree angle. I tried rocking the frame back and forth while
pulling up and back. This thing won't budge. Is there some secret technique
for getting the windshield frame off? TIA,
Bill in Tehachapi -getting ready for Triumphest SLO 2009!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|