triumphs
[Top] [All Lists]

Re: [TR] thickness of clutch mc to slave line?

To: dorpaul <dorpaul@bellsouth.net>, triumphs@autox.team.net
Subject: Re: [TR] thickness of clutch mc to slave line?
From: Bob <rpeglow@optonline.net>
Date: Thu, 07 May 2009 10:02:57 -0700
Paul, Sorry, I don't know fitting type, I guess I was lucky my car was
stock.
It matched fine on the adapter to the flex line as well.
Someone on the list will probably knows the "stock" fitting size.
Regards, Bob

----- Original Message ----- 
From: "dorpaul" <dorpaul@bellsouth.net>
To: "Bob" <rpeglow@optonline.net>; <triumphs@autox.team.net>
Sent: Thursday, May 07, 2009 4:51 AM
Subject: Re: [TR] thickness of clutch mc to slave line?


> Bob, thanks!
> Do you know what type fittings it has?
>     I have a different mc than the original (it's County brand), but, I
lost
> the adapters it uses for this particular mc line.
>                       Thanks,          Paul
>
> ----- Original Message ----- 
> From: "Bob" <rpeglow@optonline.net>
> To: <triumphs@autox.team.net>
> Sent: Tuesday, May 05, 2009 9:42 PM
> Subject: [TR] thickness of clutch mc to slave line?
>
>
> >I recently used the stock pipe piece from TRF PN 148816.
> > It required minimal reshaping and worked just fine.
> > Regards,
> > Bob
> >
> >
> > >
> >> On May 5, 2009, at 5:44 AM, dorpaul wrote:
> >>
> >> > Hi,
> >> >
> >> > Is it correct to use the same size tubing
> >> > between the Clutch MC and it's slave cylinder
> >> > as that of the brake line (I think that's 1/8" tubing, right?).
> >> > Is there any benefit to using a larger diameter tubing for this
> >> > line?  If so,
> >> > I'll need to obtain fittings for the larger tube (from where?).
> >> >
> >> > Thanks, Paul Dorsey
> >> > _____
> >>
> >
> >
> >
> >
> > E-mail message checked by Spyware Doctor (6.0.0.386)
> > Database version: 5.12320
> > http://www.pctools.com/en/spyware-doctor-antivirus/
> > _______________________________________________
> >
> > Support Team.Net  http://www.team.net/donate.html
> >
> > This list supported in part by the Vintage Triumph Register
> > http://www.vtr.org
> >
> >
> > Triumphs@autox.team.net
> > http://autox.team.net/mailman/listinfo/triumphs
> >
> > You are subscribed as dorpaul@bellsouth.net
> >
> > http://www.team.net/archive
>
>
>
>
>
> E-mail message checked by Spyware Doctor (6.0.0.386)
> Database version: 5.12330
> http://www.pctools.com/en/spyware-doctor-antivirus/





E-mail message checked by Spyware Doctor (6.0.0.386)
Database version: 5.12330
http://www.pctools.com/en/spyware-doctor-antivirus/
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>