This really is LBC related:-)
Tonight, while changing a light bulb on my driving lights (Hella FF700,
FWIW) I snapped two little ears off. The lamps are fine and once the bulb
is replaced will work well, but lacking those two tabs the front and the
back half will not stay together. The down and dirty fix is to glue the
lamp together, but this will eliminate the ability to ever change the bulb
again in the future.
Can anyone suggest a glue that will hold, yet remain soft enough to come
apart in 5 or 10 years? Both sides are that hard plastic like used on
modern cars body panels.
Any other thoughts, fixes or suggestions would also be appreciated.
Ken Gano
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|