Hi Greg,
Just a month ago the differential was replaced with a limited slip from a
Nissan Z car. It was a used but low mileage diff with a ratio of 4.10. The
installation hardware came from Richard Good and was nicely made. The change
has been dramatic with the car being much quieter. Not only were the old
diff mounts warn but the gears also sang. All in all a great upgrade that
I'd recommend when increasing power. Perhaps over the winter I can get a
Corvair axle hub set ready.
Rick
-----Original Message-----
From: Greg [mailto:one_second_zero@yahoo.com]
Sent: Tuesday, July 17, 2007 12:38 PM
To: Triumph List; patton@suscom-maine.net
Subject: Re: [TR] Building a 150 hp engine
Hi Rick, did you swap out the diff to something more robust or are you
running the TR6 OEM differential?
Regards, Greg H
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|