As I learned it, you tack weld all around the perimeter, and then did a
complete weld
---- Paul Dorsey <dorpaul@negia.net> wrote:
> Is it really any better to completly weld in the the outside perimeter of the
> battery box (observing necessary cooling down periods to avoid the heat from
> warping things) vs. spot welding it's perimeter and then using some product
> like seam sealer to keep out the water.
>
> Thanks, Paul Dorsey0 TR3
> _______________________________________________
> jackandangie@comcast.net
>
> Triumphs mailing list
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|