To: | "list Triumph" <triumphs@autox.team.net> |
---|---|
Subject: | [TR] chamfer confusion? |
From: | "Paul Dorsey" <dorpaul@negia.net> |
Date: | Fri, 6 Jul 2007 20:28:20 -0400 |
List, On my 60 TR3A, between my SU's and the intake manifold are three gaskets (under each H6): between the two thin ones is a 3/8" thick gasket. Only one one side of that gasket is a small chamfer (rut) cut on the 1 3/4" main hole. Does the chamfer face the carb or the intake? why? or does it matter? Thanks, Paul 60 TR3 === This list supported in part by The Vintage Triumph Register === http://www.vtr.org |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: [TR] Scratched TRF Alloy Drums, Jerry Shaw |
---|---|
Next by Date: | Re: [TR] Weber tuning/jetting needed at VTR, Mark J. Bradakis |
Previous by Thread: | [TR] Out of Sight, Out of Mind, Bob Danielson |
Next by Thread: | [TR] TR3A no oil pressure?, amcewen2 |
Indexes: | [Date] [Thread] [Top] [All Lists] |