In a message dated 1/8/2007 4:34:05 PM Central Standard Time, ray@raysmg.com
writes:
> I'm rebuilding the front suspension on my TR3. The passenger side is
> complete; no problems. I have the driver's side almost completely
> disassembled. The shock, spring, spring pan, upper wishbone, vertical
> link/trunion, and lower trailing wishbone piece are out. All that
> remains is the forward lower wishbone arm. As I try to remove it, as I
> did on the passenger side, it comes in contact with the large hex nut
> on the bottom of the steering box. There is no way to get it off with
> the nut in place. (I have a photo if needed)
>
It's easier to remove the two or three bolts that secure the steering box and
move it out of the way. You don't have to move it very far. BTDT.
Dave
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|