In a message dated 11/22/2006 12:45:09 PM Mountain Standard Time,
tr3driver@ca.rr.com writes:
> My welding question is: can you weld a brass fitting to a
> steel tank or does
> it take a special process?
Takes a special process, called brazing.
Or an even easier process called soldering....
Robert B. Houston
Texan in New Mexico
63 TR4
As he stared at her ample bosom, he daydreamed of the dual Stromberg
carburetors in his vintage Triumph, highly functional yet pleasingly formed,
perched prominently on top of the intake manifold, aching for experienced
hands, the small knurled caps of the oil dampeners begging to be inspected and
adjusted as
described in chapter seven of the shop manual.
Dan McKay
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|