Unless they change the properties of steel, I used to braze brass to
steel all the time. I used to have to build brass bearing races on drill
collars working at a steel tool company.
Regards
Jerry L. Stasyszen, Network Administrator
Oklahoma Department of Mental Health & SAS
405.522.6278 / Fax: 405.713.2451
Email: JStasyszen@odmhsas.org
-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net] On Behalf Of Bob Danielson
Sent: Wednesday, November 22, 2006 11:39 AM
To: 'Triumph Email List'
Subject: [TR] Welding Question
My day for easy question.... The NPT responses were excellent and now I
understand.
My welding question is: can you weld a brass fitting to a steel tank or
does it take a special process? I'm having my gas tank cleaned/repaired
and I want a fitting put in. They'll do the welding but can I use brass
or should I try and find steel NPT fittings?
Thanks again
Bob Danielson
1975 TR6
http://tr6.danielsonfamily.org
--
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.431 / Virus Database: 268.14.12/545 - Release Date:
11/21/2006
10:36 PM
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
Archives at http://www.team.net/archive ===
http://www.team.net/the-local
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|