Darrell:
Check your copy of the TRA Judging Standards and Restoration Guidelines.
The 3 piece rear tonneau cappings were always vinyl, and the dog legs, door
edge rolls, and scuttle edge roll trim were either leather or vinyl to match
the trim (seats) in the car.
Mark Macy
New Carlisle, OH
Date: Tue, 28 Nov 2006 13:28:27 EST
From: TR250Driver@aol.com
Subject: Re: [TR] TR3A door caps, etc, help needed
In a message dated 11/28/2006 1:10:18 PM Eastern Standard Time,
tr3driver@ca.rr.com writes:
> I believe the doglegs were leather only if the leather seat option
was
> selected. I've seen both kinds, apparently from the factory.
>
> Randall
>
Randall,
Interesting! I am having a Senior Moment on that question right now.
I
should know this but I am stumped. Question would be: What is
actually covered
in leather if the Leather Option was selected at the factory? I need
this info
for the TR3B since I am planning on recovering the leather seats.
Another
problem is the 3B is at the paint shop and not home currently. I can't
even say
what is leather now other than the seats. The guy at the shop says
everything else looks like vinyl. It is a 3 hour road trip to get
there. What say the
wisdom of the List? Would it be different for a TR3 or TR2 interior?
Thanks,
Darrell
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|