>I way not have explained myself properly. It is not the wheels that I am
>trying to remove; they are already off. It is the splined adapters that
>are
>bolted to the front hubs. When I try to undo the nuts the whole assembly
>rotates (as it is designed to do). I am looking for recommendations on the
>best way to prevent the assembly from turning.
>
>Thanks
>Ian
>62 TR4
Have someone hold the brakes. Or, If you'rs a loner like me, I use a Stanley
ratcheting bar clamp, configured as a spreader, in between the seat and the
brake pedal.
John
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|