triumphs
[Top] [All Lists]

Re: [TR] TR4 Wire Wheel Adapter Removal

To: "Ian" <Lbc.Resto@comcast.net>,
Subject: Re: [TR] TR4 Wire Wheel Adapter Removal
From: Bill & AnnaBelle <anabil007@comcast.net>
Date: Fri, 11 Aug 2006 12:47:28 -0700
Whack them with a rubber hammer ...  then clean the rust off and coat 
with anti-sieze (lightly) when you put them back on ... don't forget 
to torque them to specs ... worked for me...


>I had a hard enough time removing the rear W/W adapters and am now stuck on
>the front ones.  What is the best way to remove them when the car is up on
>jack stands?
>
>
>
>Thanks
>Ian
>62 TR4


-- 
Bill  Pugh
1957 TR3 TS16765L
aka
Casper

AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org



<Prev in Thread] Current Thread [Next in Thread>