>scroll down
>
>
>> Seems within the charter of the group. Post it.
>>
>> Failing that, let me know what you have.
>>
>> Phil Ethier
>>
>--------------------------------------------------------------------------
----
>----------------
>OK here it is...(thanks Phil & Randall)....after having a nice success on
the
>production of the Dash Bracket. An item that people seemed to need, and
>appreciate, I am ready to move forward on another project.
>
>Torque Reaction Arm-Moss P/N 031-651 "NA"
>Moss confirms that it not available on either shore by them.
>Rimmer Brothers DOES list it as being available, but I did not inquire.
>If I get ten orders, I will produce and sell at $24.00 .
>
>They will be blanked, formed, welded, and weld nut applied as the
original.
>
>The bonded rubber button that screws into this part is available from
Moss. I
>could order them in quantity and include as part of the assembly at my
cost
>and your convenience. That would make them about $29.
>
>This part might have to be reconfigured for a TR3A and might not work for
a
>TR4A, but I have not explored that. If someone wants to investigate that
and
>respond, but I dont think it was offered on those models.
>
>I cant say how effective these reaction arms are but I DO have one my
vintage
>racer. I would rather do this than hard mount the engine as it plays havoc
>with fuel delivery due to the vibration and harmonics.
>
>You name is all that I need and your desire to buy one. I'll assume all
risk
>from there.
>
>I will schedule production before I leave for the VTR Convention, if I get
10
>names. It seems like 10 responses in a short period is a good indicator of
>the market and I will likely produce about 50 of them as a one time
project.
>
>As an old factory rat (retired), this fun stuff for me.
>
>Thanks
>
>N197tr4@cs.com
I'm leaving for VTR Sunday morning, but I think I want one.
Phil
|