scroll down
> Seems within the charter of the group. Post it.
>
> Failing that, let me know what you have.
>
> Phil Ethier
>
------------------------------------------------------------------------------
----------------
OK here it is...(thanks Phil & Randall)....after having a nice success on the
production of the Dash Bracket. An item that people seemed to need, and
appreciate, I am ready to move forward on another project.
Torque Reaction Arm-Moss P/N 031-651 "NA"
Moss confirms that it not available on either shore by them.
Rimmer Brothers DOES list it as being available, but I did not inquire.
If I get ten orders, I will produce and sell at $24.00 .
They will be blanked, formed, welded, and weld nut applied as the original.
The bonded rubber button that screws into this part is available from Moss. I
could order them in quantity and include as part of the assembly at my cost
and your convenience. That would make them about $29.
This part might have to be reconfigured for a TR3A and might not work for a
TR4A, but I have not explored that. If someone wants to investigate that and
respond, but I dont think it was offered on those models.
I cant say how effective these reaction arms are but I DO have one my vintage
racer. I would rather do this than hard mount the engine as it plays havoc
with fuel delivery due to the vibration and harmonics.
You name is all that I need and your desire to buy one. I'll assume all risk
from there.
I will schedule production before I leave for the VTR Convention, if I get 10
names. It seems like 10 responses in a short period is a good indicator of
the market and I will likely produce about 50 of them as a one time project.
As an old factory rat (retired), this fun stuff for me.
Thanks
N197tr4@cs.com
|