Hi All
I have experience of several rebuilt exchange racks that I have been asked
to fit, NOTE these come from regular suppliers not Triumph specialists. One
had been rebuilt and then shot blasted and painted, I worked it from end to
end and it was gritty so it went back! Another lasted about 13 months so I
stripped it down and found that the passenger side rack tube bush was only a
third the length it should have been, a ten pound component cut in 3 to make
it do 3 racks, no wonder I couldn't do a rack for 30 pounds and they could!
I hope the big suppliers don't get their racks from the same source, and
preferably they will do their own rebuilds.
Graham.
----- Original Message -----
From: "John Gumkowski"
Sent: Friday, December 24, 2004 2:03 PM
Subject: Re: Steering Rack
> Thanks to all for the responses, but I don't think I was clear with my
> original post. The rack bushes are OK, but the rack itself (inside the
> tube) can be moved from side to side. That side to side movement is
> causing the clunk.
>
> I see that there is a $14.95 bush (Moss 667-115), but replacing it looks
> difficult. I like the full rack replacement idea - all parts new or
> checked. Who has the best quality for the $? I'll be going for the
> poly rack housing bushings as well.
>
> Thanks.
>
> John
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.813 / Virus Database: 553 - Release Date: 14/12/2004
|