Stan,
If the rich running is all thats keeping you from the VTR......get out in the
garage and get to work!
It can only be a few things:
1) Float level set wrong or floats not floating.
2) Debris in the needle / seat
3) Bowl vent blockage (this one got me before). Remove the air filter
housing. Look straight at the mounting flange. On the upper LH "corner" there
is a 1/4" hole that needs to be open. Make sure the gasket on the air filer
housing for each carb has a matching hole in it. Also, right above the air
opening is a rectangular slot (maybe 1/8" X 3/4"). Make sure it is open too.
4) Chokes assembled / adjusted improperly.
You're looking at an hour tops! Get on it and get to the show!
I drove my '74 TR6 (body off-frame resto w/ just a few miles on it) from
Oklahoma to VTR in Pennsylvania last year! No guts, no glory!!
Chad
---------------------------------
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway - Enter today
|