L.U.K clutch

["Bob Rochlin" <r_rochlin@hotmail.com>]

Graham,
    I was under the impression that the L.U.K clutch and the Laycock were
essentially the same.
    I do know that when using the Koyo TO bearing one must be sure to use it
with a compatible pressure plate assembly or the clutch effort will increase
quite a bit.  The Koyo bearing has a larger diameter and can come off the
"ramp" formed by the  end of the clutch fingers on some pressure plates as
they are depressed.
Bob Rochlin
72' TR 6

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive