John, here is a website with some useful info:
http://athene.as.arizona.edu/~fwildi/cars/tech_talk/steering_frame.htm
Also, I have heard that the TR4 rack is too wide by 3 or 4 inches and will
not work properly for TR3s and TR3As. I'm not sure about the TR3Bs though.
paul w
Torrance, CA
56 TR3
64 TR4
----- Original Message -----
From: "John Bumpus" <jbumpus@shaw.ca>
To: <triumphs@autox.team.net>
Sent: Friday, December 06, 2002 5:19 PM
Subject: steering
| I'm presently in the middle of restoring a TR3B and would like to convert
it to Rack and Pinion steering so I am hoping the list can help me with any
information on this project ie: kits that are avialable, doing the job
without a kit, I do have a rack and pinion from a tr4 Thanks for the help
Bumpy
|
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|