John:
What shape are the battery cables in? My TR6 did this, and it turned out
the the quick release that the PO had installed on the battery ground
cable was defective. It would loosen up when it felt like it, causing a
no start condition.
Paul
>
>
>> Well, heres the latest update. Today I replaced the coil, condenser,
>> distributor cap and rotor arm. I tested the wires going to the coil and
> they
>> are all good. Once I had replaced everything the car started right
>> up! I
> then
>> decided to take it around the block but as soon as I got out of the
> driveway
>> it went dead...and would never restart. What could possible be wrong?
>> With
>> the key turned on I am getting no spark at all anywhere?!?! Am I
>> missing
>> something?
>>
>> Please help
>>
>> Thank you all for all your help!!
>> John
>> 1968 TR250
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|