I Just dropped the oil pan to correct an oil leak from the aluminum
sealing block and noticed all the threaded holes are stripped. I am in
the process of installing helicoils but the two bolts that are used for
the oil pan had already been repaired with heli-coils but failed. I
think the aluminum is brittle.
I just read about a recall on this from June 69 and they describe a
replacement sealing block which matches up in part # to mine. It appears
they suffered from bowing and stripping but the replacement seems to be
only a marginal improvement.
I am thinking about machining in a threaded nut in to the stripped hole,
any thoughts?
--
Mitch Seff
75 TR6
Oceanside, N.Y.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|