The lens on mine were always and still are clear.
Don Elliott
----- Original Message -----
From: Musson, Carl <musson@arts.usf.edu>
To: <triumphs@autox.team.net>
Sent: Monday, December 31, 2001 12:16 PM
Subject: RE: Tr3a front flashers
> The boot piece is the same for front or back. They are repro units and it
> will require you to feed 3wires through 2holes.
>
> The front lens should be amber or clear. I am not sure of the change
point
> - if there is one. It might be that local regs require one or the other.
> Another way to deal with it is amber bulbs in a clear unit.
>
> Carl
>
>
>
> -----Original Message-----
> From: David Templeton [mailto:davidt@opentext.com]
> Sent: Monday, December 31, 2001 12:10 PM
> To: 'triumphs@autox.team.net'
> Subject: Tr3a front flashers
>
>
> Morning all,
>
> I am about to order new rubber boots for the flasher lights and noticed
they
> list the same part for the front and the back this would indicate only two
> wires into the unit, just as the wiring diagram confirms.
>
> So I am back to a delemia, what the heck are the one I have that have 3
> wire?
>
> And what colour are the front flasher lights supposed to be amber or red?
>
> Signed
> So confused
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|