| To: | TR <triumphs@autox.team.net> |
|---|---|
| Subject: | TR3 Wiring Harness Prep |
| From: | Geo Hahn <geohahn@theriver.com> |
| Date: | Sat, 10 Mar 2001 20:03:33 -0700 |
Getting ready to put in a new wiring harness using an old-style Voltage Reg, Fuse Block, etc. with screw connectors (not Lucar/spade connectors). Is it best to tin (coat with solder) the wires that will be clamped into the screw connectors? Seems like this would be neater and assure a solid connection but didn't know if there were any problems with this approach. Thanks for any thoughts. Geo Hahn 59 TR3A /// /// triumphs@autox.team.net mailing list /// |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Dash refinishing, Michael D. Porter |
|---|---|
| Next by Date: | building a better shock link, David Massey |
| Previous by Thread: | Dash refinishing, Michael D. Porter |
| Next by Thread: | Re: TR3 Wiring Harness Prep, Randall Young |
| Indexes: | [Date] [Thread] [Top] [All Lists] |