I believe Randall and I are looking at the same parts book, since
he is correct with reference to the "*". It also states, though that
when there is no Commission Number in columns e, g or j, parts are
used on both TR2 and TR3 models. For the Dipper Switch Bracket,
there are no commission numbers listed in these columns. The way I
read this, but could be wrong, is that they can be used on either.
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
Randall Young wrote:
>
> If Scott's book reads the same as mine, I'd take that with a grain of
> salt. (IOW it may not be correct.) My book also lists all three P/Ns,
> with no crossover figure. However, the footnotes state "Interchangeable
> items are marked with *", and there's no asterisk next to the dimmer
> switch bracket numbers.
> Plus, just a few lines above, two different screws are listed for the
> grab handle attachment, and I do not believe they interchange.
>
> Randall
>
> suhring wrote:
> >
> > Lou:
> >
> > >From my read of the parts manual, for left hand drive TR2s and TR3s,
> > the brackets are interchangeable. The part numbers can be 601991 or
> > 608811 or 609384.
|