| To: | Triumph Mailing List <triumphs@autox.team.net> |
|---|---|
| Subject: | RPM and 'actual' speed |
| From: | "steven@cravetechnology.com" <steven@cravetechnology.com> |
| Date: | Fri, 16 Jun 2000 16:31:07 -0600 |
| Organization: | Crave Technology |
My speedo wanders -- in part, due to the 30 foot long speedo cable <g> installed by the DPO -- and I've verified that the reading is off by about 20% using convenient radar-enabled signs. After putting giant tires on my old jeep, I learned to recalculate MPH on the fly, but I was thinking that there must be a formula to convert the tach reading to MPH. Has anyone done the math for this? -- Steven Newell Crave Technology, Inc. steven@cravetechnology.com http://www.cravetechnology.com 303.675.0777 / 303.675.0999 (fax) |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Too Much Oil?!, OHFASTONE |
|---|---|
| Next by Date: | RE: TR250 Vacuum control valve M and G, The Brooks' |
| Previous by Thread: | Re-bushing a PI throttle shaft., John Macartney |
| Next by Thread: | RE: RPM and 'actual' speed, Randall Young |
| Indexes: | [Date] [Thread] [Top] [All Lists] |