Where can I find this stuff in Canada?
Patrick
-----Original Message-----
From: Winnie Olmer <who@sover.net>
To: 'John E. Allen' <JALLEN/0001060003@MCIMAIL.COM>
Cc: triumphs@autox.team.net <triumphs@autox.team.net>
Date: Wednesday, June 16, 1999 7:16 PM
Subject: RE: Prep for POR-15?
>
>Been gone a couple days... new job
>
>The thread on Corroless and POR15 has been great! I'm glad to hear about
the
>"Corroless success stories". I'll stick with the Corroless I already
bought.
>Hopefully it sticks as well!
>
>Sounds like Ras'o'nil and Extend are probably pretty much the same stuff. I
>used Extend years ago. If I remember correctly, it is a milky white liquid
>with the consistency of water. It dries to a hard black thin finish. I'm
>looking at the finish right now.. in the living room! About four years ago
I
>used Extend on two 24" lengths of 1 1/2" threaded iron pipe, three 90's,
>two street 90's, two short nipples and two flanges. Put them all together,
>bolt it to the wall, attach a piece of mahogany and voila... you have an
>articulating arm able to carry a 15" monitor, keyboard and mouse. I have
two
>teenage kids who "live" on the net when home. It's pretty amazing how often
>we access the net as a resource since it is always right there at our
>fingertips. Anyway... I digress... Back to Triumphs.
>
>Winnie
>'72 TR6
>
>-----Original Message-----
>From: owner-triumphs@autox.team.net
>[mailto:owner-triumphs@autox.team.net]On Behalf Of John E. Allen
>Sent: Tuesday, June 15, 1999 9:35 PM
>To: Andy; triumphs
>Subject: RE: Prep for POR-15?
>
>
>
>This sounds exactly what was recommended to me, but the difference was
>using "Extend" rather than "Ras'o'nil"...and then Corroless...but I'll bet
>that the results are about the same. Both of the products are liquid enough
>to get into the small areas...
>
>I wonder if Eastwood would make a definite statement on using Corroless
>over either of these products??
>
>john
>
>-----Original Message-----
>From: Andy
>Sent: Tuesday, June 15, 1999 7:08 PM
>To: triumphs
>Subject: Re: Prep for POR-15?
>
>
>
>Skip,
>I'm with you, I said this in a message earlier but my "Free Mail" ((TM) for
>
>the Copyright police) seems to have a problem with multiple addressees.
>I use "Ras'O'Nil"(TM) it's thin enough that I can brush it on or use a
>spray
>bottle from "Home Depot" (TM) (smells like acid) then I paint it with
>"Corroless"(TM). I did the TR6 chassis last year and nothing has come
>back.
>Andy
>
>On 06/15/99 08:50 PM Skip Montanaro said...
>>
>>There was mention of prep solutions for POR-15. I seem to recall
>phosphoric
>>acid as being a primary ingredient. Would Naval Jelly be a decent
>>alternative? H2PO4 (if I remember my H.S. chemistry correctly) is the
>main
>>active ingredient in Naval Jelly, right?
>>
>>Skip Montanaro | http://www.mojam.com/
>>skip@mojam.com | http://www.musi-cal.com/~skip/
>>518-372-5583
>
|