Hutmacher, Greg wrote:
> I'm 6'3" and 240 lbs and plan, someday, to relocate my TR6 seat tracks back
> a couple of inches. I haven't really researched this yet (anyone on the list
> done this?) but it seems like it would be fairly straight forward work.
> Drill four new holes and weld on new captive nuts underneath, then fill the
> old holes. Any thoughts on this from the list?
> Regards, Greg Hutmacher
I often get a lot of requests that wives cannot drive the cars because the
seats don't
have much adjustment. I usually install generic tracks which require a little
bracketry to be made up, but they slide easier and have a greater travel. This
is
great for moving the seats closer to the pedals, but unfortunately, I don't
think you
can go too much further back than the stock tracks as the seat back will hit the
wheelarch.
Good luck!
Regards,
Brian Schlorff '61 TR-4 '64 TR-4 '72 TR-6 '79 Spit
---------------------------------------------------------------------
Power British Check out Power British
371 E. Main St. on the 'net!
Norristown, PA 19401
(610) 270-0505 http://www.powerbritish.com/~britcars
---------------------------------------------------------------------
|