I'm 6'3" and 240 lbs and plan, someday, to relocate my TR6 seat tracks back
a couple of inches. I haven't really researched this yet (anyone on the list
done this?) but it seems like it would be fairly straight forward work.
Drill four new holes and weld on new captive nuts underneath, then fill the
old holes. Any thoughts on this from the list?
Regards, Greg Hutmacher
\\\\\\\\\
Date: Wed, 07 Apr 1999 10:51:24 -0700
From: vandermeulen@ns.sympatico.ca (John Vandermeulen)
Subject: driver leg room TR4
I drive a '67 TR4A, but have problems with leg-room. I am 6'1",220 lbs,
but everyone who has sat in the driver's seat has complained of lack of
space. With my feet on the pedals, my right knee is back up under the
steering wheel, with only about 2" clearance between the steering wheel
and the transmission tunnel.
The steering wheel is a smaller one than the OE that came with it. It
was almost impossible to drive with the OE wheel.
The steering column seems to come out of the dash alright - at least
there is no obvious gap between the column and the dash. The driver's
seat might be a touch thick, but that still does not cause the very
little space between the wheel rim and the tran.
Has anyone else had this problem?
|