RE: TR6 Trani Oil Pug

[Malcolm Walker <walker05@camosun.bc.ca>]

On Sat, 25 Oct 1997, Peter Zaborski wrote:

> (Might as well get a 1/4" 8 point for the rear brake adjusters while you
> are it also).

A much easier route is to use a 1/4 inch drive socket, backwards.  I have
a set o' tools with a hex (allen key) socket in it, I use a 3/8 allen key
coupled to a 3/8 small socket.  That way you won't keep grabbing the
8-point sockets by mistake when you want a 6-or-12 pointer.

-Malcolm