Okay, there has always seemed to be a lot of experts on the line, so how
about some input.
I just replaced the trannie on my 68 GT6. Non O/D.
I have always had excellent results from a 50/50 mixture of Moery's oil
stabilizer and Valvoline SAE 70 racing gear lube.
This time however, in an effort to protect the investment in the new (not
rebuilt) trannie, I used my usual mixture of lube with one modification.
I added about 3 oz. of "Man Trans" Slick 50 wear protectant.
Oil level was correct, new front seal and gasket etc.
I noticed that aftera drive, there is a puddle of "foamy" oil dripping
and as a result, the level continues to drop.
Question: Does the Slick 50 additive cause the lube to foam excessively
capturing air and creating excessive pressure in the trannie , causing
the foamy oil to leak?
This is my first experience with Slick 50, and so far, I'm not realy happy
with it.
Any feedback?
Tony R.
69GT6
68GT6
67GT6
64TR4
TTFN
###
|