All the switches on my 1A are 3-position switches. The PANEL switch (and
only the PANEL switch) is unique in that it has a built-in resistor to dim
the panel lights. Switch positions for the PANEL switch are OFF, DIM, ON.
The other switches are ordinary 3-position switches. BLOWER: OFF, LOW,
HIGH; WIPER: OFF, SLOWER, SLOW; LIGHTS: OFF, PARK, ON. Yours should be the
same.
Will Seay B382001570
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of e.coiner@cox.net
Sent: Thursday, August 19, 2010 11:47 PM
To: tigers@autox.team.net
Subject: [Tigers] Tiger Panel Switch Question
What is the correct switch for the Instrument panel lights on a late Mk1a
Tiger?
I am getting some conflicting info.
My car has a two 3 position switch with a built in resistor so I have two
light levels, dim and flicker.
Smitty maintains that it should be a very small two position switch.
What does your car use?
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/tigers/wseay@embarqmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|