Can't speak to the Mark 1A; my Mark 2 has a double pole 3 position switch.
There may be a built in resistor. If so it isn't obvious and I didn't put a
meter on it.
Tom
' 67 Mark 2
On Thu, Aug 19, 2010 at 11:47 PM, <e.coiner@cox.net> wrote:
> What is the correct switch for the Instrument panel lights on a late Mk1a
> Tiger?
>
> I am getting some conflicting info.
>
> My car has a two 3 position switch with a built in resistor so I have two
> light levels, dim and flicker.
>
> Smitty maintains that it should be a very small two position switch.
>
> What does your car use?
> _______________________________________________
> Tigers@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/tigers/tkparker1941@gmail.com
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|