My Mk IA has a 3 position switch. The dash lights are barely
visible with 12V applied; a dim position might as well be off.
My Alpine parts list shows 3 panel switches - Lucas #s 31947A, 31946A, 34544
My 260 & 289 parts list show 1 switch - Lucas # 34943
The 31946 switch is also listed for the light switch so it is a 3 position
switch; as for the others I don't know if they are 2 or 3 position switches.
I have a couple Lucas 2 position switches - # 31828 and 31828D; I don't see
these numbers listed in the Parts Lists.
Ron Fraser
-----Original Message-----
From: tigers-bounces@autox.team.net [mailto:tigers-bounces@autox.team.net]
On Behalf Of Rollright@aol.com
Sent: Friday, August 20, 2010 9:01 AM
To: tigers@autox.team.net
Subject: Re: [Tigers] Tigers Digest, Vol 4, Issue 419
Hello,
My car has a three position switch which has been with it all the 34 years
I've owned it
Jim Armstrong
Mk 1A 382002083
LRXFE
What is the correct switch for the Instrument panel lights on a late Mk1a
Tiger?
I am getting some conflicting info.
My car has a two 3 position switch with a built in resistor so I have two
light levels, dim and flicker.
Smitty maintains that it should be a very small two position switch.
What does your car use?
_______________________________________________
Tigers@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|