A solid state replacement regulator for both systems, in one package, is
available from Ed Esslinger (Edstiger@charter.net), as well as a solid
state intermittent windshield wiper control. Yes, I know that the Lucas
becomes that way, but this is intended! (9-)
Theo Smit may still be selling a voltage regulator version as well.
Steve
MACHWIL@aol.com wrote:
>If the instrument voltage control is faulty, BOTH the fuel and temp gauges
>will vary with respect to voltage supplied. At idle it will read low. At
>speed, when the generator is supplying more than 12 volts, it will read high.
>On
>my 1A the I found the PO had bypassed the inst. voltage control. In testing
>the
> gauges with a control the difference was quite significant. Check your
>wiring diagram, then check the voltage control. My problem was similar to
>yours
>on both gauges.
>Bud W
>
>
>
--
___
Steve Laifman
Editor - TigersUnited.com
|