Jerome, I have sanded, buffed, painted, and it depends on the
condition of the part. If not really bad, it can be buffed, and the
color will not be new, but looks very good. If really bad, sand with
600 wet dry paper, then buff. Take time, not to loose contours of
part.
On the steering wheel where it cracks at the hub, I used PC-7 to fill
crack, sanded, primed, and painted. Looks very good.
Take your choice depending on the condition of the part, but take your
time, and as Dave said, if buffing, don't get it too hot, and clean
the buffing compound off often.
Have fun at doing this.
Larry
|