Bill,
Its been a long time but I think you:
Undo the axle nut ( very tight) Then remove roadwheel.
Undo the lower ball joint that act as the steering swivel pin. Then with the
steering on full lock the splined axle shaft will just pull out of the rear
of the hub, and then you can remove the drive shaft from the diff.
Guy
----- Original Message -----
From "Bill Hunt" <Billh at aaai.com>
To: <spridgets@autox.team.net>
Sent: Friday, May 09, 2003 10:03 PM
Subject: Mini questions
> Trying to figure out how to pull the driveshafts out so we can get the
> engine out of the Mini. Anybody have any tricks and/or tips?
>
>
>
> Herby
>
> 64 MKII Sprite (Herbytoy - patiently waiting)
>
> 62 MKII Sprite (the "resto-mod" driver)
>
> billh@aaai.com
>
> www.herbytoys.com <http://www.herbytoys.com/>
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/spridgets
|