Yep, I'm a little behind on emails!!
What he wrote on the driveshaft install is the same method.....
Jason.
At 10:16 PM 6/7/99 +0000, you wrote:
>
>I make a U shaped hook out of a coat hanget and drop it down between the
rear
>of the tranny and the sheet metal that surrounds the shifter.when the
>driveshaft is inserted into the tunnel I hook the yoke with the wire and
work
>it into the tranny.It takes a little doing but you don't have a pile of
trash
>in the tunnel.Brad
>
| Jason Urban - APOGEE LABS 215-699-2060 |
| CA Studio web.p3.net/~jurban |
| '95 Z/28 6spd '65 Austin-Healey Sprite |
| '96 Land Rover Disco |
|