Hi Fred,
How about the liquid type electrical insulating glue. Comes in a
can with the brush in the cap. I use it on all the electrical
connections on my cars and on the boat. Be careful, though. It sticks
quite tenaciously to everything, including skin. Only a very small
amount is required for a job such as yours, but you'll have to buy a
whole can. I think they have a 1/2 pint size available. Check with the
local electrical supply house in your area if the auto supply store
doesn't carry it.
Good Luck.
Kevin Thompson
Cape Cod British Car Club
http://clubs.hemmings.com/capecodbritish
Date: Thu, 17 Apr 2003 08:42:15 -0600
From: "griffco" <griffco@griffco.ca>
Subject: Fw: Wiring Harness Tape
On replacing the tape on an original wiring harness, I note that the
ends are
glued down.
I bought new wiring tape from British Wiring, and when I asked how to
fasten
the ends down, as per original, they said 'use black tape'. I am
disappointed. There has to be a better way. Anyh black tape I have
used
loses its grip, oozes sticky, and isn't original.
Any suggestions on a glue?
Cheers, Fred
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|