Yeah. I used some 1500 deg. paint that you bake on
(stick it in an oven to cure it). Looked great, until
the engine ran for about 3 minutes.
By the end of the month, it had completely burnt and
peeled off of the header.
-Terry
--- Joe Curry <spitlist@gte.net> wrote:
>
> Tep735 wrote:
> >
> > The color of the block is black, the color of the
> valve cover is orange, and
> > the color of the intake is silver (a Weber DGV
> carb) I am interested in a
> > metallic color for the exhaust manifold so it
> would be a similar color of
> > the intake. The paint I plan on getting can
> withstand 1200 degrees
> > Fairenhight.
>
>
> It'll burn off, just like the 1300 degree paint I
> used on my header!
>
> Joe
__________________________________________________
|