Frank,
I did a set about 4 years ago and they still look great!
They are not at all difficult to install. The only suggestion I can make is to
get yourself a pair of hog-ring pliers. It makes
attaching those hog-rings much easier than with a pair of regular pliers.
Also if it is cool where you are working and the covers don't slip onto the
seats easily, use a hair dryer to warm up the vinyl. Being
that the inserts are fabric, this shouldn't really be a problem.
ANd be sure to remember where everything attached when you remove the old
covers.
Good Luck,
Joe Curry
Tep735 wrote:
>
> I bought new seat foams and new seat covers for my 79 Spitfire. The covers
> are beige houndstooth.
> Does anyone have any suggestions or tips about covering the seats? Any
> experiences with doing them yourself? Techniques? Just about anything
> really...
>
> Thanks,
>
> Frank
> Downingtown, PA
> 79 Spitfire- "Tahiti"
|